Professional Audio System 8x8 Dante Media processor Dante Digital Audio Processor with dsp
Main Features:
- Suitable for meeting room, campus, art performance, concert and other scene areas
- Provide PC software and web control
- System built-in lock screen function, can effectively avoid the wrong operation.
- DSP audio processing, built-in automatic mixer, feedback elimination(AFS),AGC function
- Input per channel: Front stage amplifier, signal generator, expander, compressor, 5 stage parameter equalization
- Output per channel:31 Section diagram equalizer, delay device, frequency divider, limiter
- Full function matrix remix
- Built-in automatic camera tracking function
- Support for scenario presets；
- Automatic memory protection when power off
- 1U Whole aluminum chassis
- Built in Dante Module,4CH
Specification:
| Product Technical Parameters | | DSP Chip | Dual Core Ti 450MHz FLOPS | | Centrally controlled instruction set generator | Support | | Input Processing | Pre-amplifier, signal generator, extender, compressor, 5-segment parameter equalization, inversion, automatic gain, automatic mixing | | Output Processing | Segment 31 shows equalizer, delay device, frequency divider, limiter, and inverting | | Matrix Mixing | Input and output signal matrix mixing, mixing component control | | Automatic camera tracking function | Support | | Scene preset | 100 groups of custom Settings | | Sampling | 48KHz | | phantom power | 48V | | Frequency response | 20 - 20K Hz,±0.2dB | | THD+N | ≦0.004% @4dBu | | Digital to analog dynamic range (A Weighted) | 120dB | | Analog to Digital dynamic range (A Weighted) | 114dB | | Input Impedance (Balanced) | 20kΩ | | Output impedance (Balanced) | 100Ω | | EIN(A Weighted) | ≤-120 dBu | | Channel isolation | 104dB @1k Hz | | Common mode rejection | 70dB @80 Hz | | Maximum input level | 18dBu | | Maximum output level | 18dBu | | Floor Noise | -90dBu | | Working Power | DC12V/2A | | Size | 482*258*45(mm)； | | Net Weight | 2.5kg | | I/O | | Model No. | MX-0808-C | MX-0808D-C | MX-1616-C | | No. of analog input | 8 | 8 | 16 | | No. of analog output | 8 | 8 | 16 | | No. of Dante input | × | 4 | × | | No. of Dante output | × | 4 | × | | Ethernet | 1 | 1 | 1 | | RS485 | 1 | 1 | 1 | | GPIO | 2 | 2 | 2 | | Input gain amplification | -24～18dB,6dB,Total 7 level | | Balanced/non-balanced, | Support | | MICLINE | Support | | Each independent 48V phantom power supply | Support | | DSP Processing | | AFC | √ | √ | √ | | AEC | × | × | × | | ANC | × | × | × | | AM | √ | √ | √ | | AGC | √ | √ | √ | |
| PC Software | | PC Software | Support | | Windows32位 | Support | | Windows64位 | Support | | client-side | Built-in client, support online download | |
| Our designed PC version control software is the best tool for you to monitor and operate the digital audio processor, which can be used to edit and store scenes (such as meeting mode, artistic performance mode, concert mode, etc.) according to the acoustic characteristics of different functions. The system built-in lock screen function, It can effectively avoid the occurrence of wrong operation. 
|
Applications:
FAQ:
①The power indicator light (PWR) not working.
No light: First, check whether the power connection and power supply of the device are normal; second, check whether the power switch on the rear panel of the device is turned on;
Blinking: Unplug all GPIO cables and power on again. Please contact the manufacturer if the fault is not eliminated.
②The Status indicator (SYS) not working.
After 18 seconds of power on, the system works normally, and the system light of the equipment should flash once per second.
If it is not on, always on or flashing quickly: first, the system has an error, contact after-sales to upgrade the software version; second, long press the reset button (the R hole on the rear panel of the device) for more than 6 seconds, the device will restore the factory settings and restart automatically. Please contact the manufacturer if the fault is not eliminated.
③There's no sound in the channel.
First, check whether the wiring of audio source and audio input and output is normal;
Second, check whether the mute function of the corresponding audio channel is enabled. If the mute switch is already on, please turn off the mute switch.
Third, check whether the input processing, matrix mixing and output processing Settings of the corresponding channel are normal;
Please contact the manufacturer if the trouble is not solved.
④ can not search the device in the software.
First, check whether the system light of the device is flashing normally;
Second, check whether the network connection is normal;
Third, ensure network accessibility between the configured host and the device.
Fourth, long press the reset button (R hole in the back panel of the device) for more than 6 seconds, and the device will resume factory Settings and restart automatically.
Please contact the manufacturer if the trouble is not solved.
Product Tags:
|
|
8x8 AGC Digital Media Processor , Dante Surround Sound Processor with dsp Images
|
